OVEN WITH OVERHEAD CONVEYOR
The oven is a convection oven which allows to electrostatic powder coated work pieces to be cured usually around at 180-200°C in 10 minutes. Oven sizes are calculated properly according to the daily work piece quantities.
The ovens are 2-doors box type, conveyorised system batch ovens with axial palette overhead conveyor working step-by-step.. Powder coated work pieces are manually loaded to the conveyor at the loading station then moved into the oven as one batch and starts curing. At the same time loading station becomes empty and loading operation continues. Cooling and unloading station is at the exit side of the oven.
Axial palette conveyorised ovens are suggested mostly for step by step continuous powder coating systems combined with a powder coating booth at the same line where work piece sizes are .big and weight is heavy.
Electricity, liquid or gas fuel is used for heating the ovens.
OVEN BODY
Powder coating ovens consists of an oven body made of sandwich panels with thickness of 150mm filled with rock wool, oven heating unit, circulation fan and a heat-exchanger unit with burner for gas/diesel fired ovens or electrical resistances for electrical source ovens. Temperature controller is digital type and easy adjustable, an emergency thermostat is used for safety.
WORKING PRINCIPLE
Ventilation air created by the circulation fans passes through the heating chamber, getting the heating energy with the highest efficiency and is transferred into the oven. Adjustable air blowing openings on the air-duct located at the base of the oven maintains homogenous air distribution at the set temperature. The heating chamber is manufactured from high temperatıre resistant stainless steel.
Powder coating ovens are designed according to our long experience in order to work with the highest efficiency to achieve needed temperature with the lowest energy use.
The ovens are CE certificated and conforms to the European Norms.
> 
